Shenzhen Himatch Technology Co., Ltd.
Shenzhen Himatch Technology Co., Ltd.
Add to Cart
MDR 26 Pin High Speed Camera Link Cables Assembly for Industrial Camera
Production description
Quality Camera link Vision cable manufacturer, Himatch constructed the cable by plenum rated 11pair+2 cores robotic cable with HONDA® SDR (Shrunk Delta Ribbon) 26pin connector,UL verified MDR connector at each end.They offer outstanding quality, durability, and high performance for industrial CCD camera with SDR or MDR port. Camera Link Configuration : In Full and Medium mode , use 2 wires
Production Specification
| Standard | Camera Link | Transmit Speed Max | 2.04Gbps, |
| Installation mode | Dynamic /Static | Install radius (Min) | 75mm |
| Wire gauge | 28AWG | Cable OD | 9.1mm |
| Jacket Material | PVC | Connector | SDR-MDR |
| Operation Temperature | -20°C ~+ 80°C | Max Length | 15m |
Electric Charasteristic:
Real-time signals transmission,low latency
100% electronically tested for functionality
Low noise and good performance in skew
Shielded pairs provide superior signal integrity
Overall foil and braid shielded provides EMI/RFI protection
Flexible and reliable cable
Himatch can work with you additional requirements to your camera-link cable assemblies, such as ferrites, logo, special pin out, labels, bar-codes and custom packing, logo
The cable wicely used for Industrial visual inspection system , Industrial vision system , Industrial camera, Industrial monitor, 3D scanner, Visual recognition
Application:
Industrial imaging
Machine Vision system
Industrial camera
Scanning on pipelining
Products testing
Image recognition
Factory automation
Note:
The movable cable used for fixing will not have any problems . However, the fixing cable is NOT allow used for movable applications.
When installing the cable, please consider the allowable bending radius of the cable,if the bending degree exceeds the limit of the cable's internal structure or sheathed structure, it caused the deterioration of the cable's performance. Strongly recommend that the bending radius ≥ 4 R (R is the outer diameter of cable) when cable installed.